tunnel destination
This command defines the end point host/ip address of the specified tunnel interface. Use the no form of this command to remove a configured IP address.
Syntax
tunnel destination <host name>
|
Command |
Description |
|---|---|
|
host name |
Specifies a host name or a valid IPv4 address. IP addresses should be expressed in dotted decimal notation (for example, 10.1.2.3). |
Default
NA
Command Mode
Privileged User
Example
This example configures the tunnel destination IP address of 10.4.2.50 on interface PPTP 6.
(conf-if-PPTP 6)# tunnel destination 10.4.2.50